Home > Put Manure in its place >

Put Manure in its place

June 22, 2011

Greg Stewart, OMAFRA Corn Specialist

You have liquid manure and you would like to get the most nutrient bang for your buck. Injecting the manure directly into the ground is an approach that may have a significant impact on the amount of nitrogen available for next years corn crop. Consider an example of some of the decision making that is associated with manure application systems.

In the process of improving manure use efficiency, the first step is to get a manure sample that is representative of your manure supply and have it analyzed for nutrient content. In this example the manure analysis tells you that the total nitrogen content is 50 lbs of N per 1000 gallons of manure. This includes both the organic fraction (20 lbs N/1000 gallons) and the ammonium fraction (30 lbs N/1000 gallons). The rather stable organic fraction will not be affected by the method of application as these organic compounds breakdown gradually to release nitrogen into the plant-available form. The ammonium fraction of the manure will start to volatilize into the air as soon as it has been applied to the field. If this manure was applied in the late fall and incorporated within 24 hours the OMAFRA estimates indicate that 40% of the total N would be available to next years corn crop. If the application rate is 3,000 gallons per acre the math looks like this:
3,000 gal. x 50 lbs N /1000 gal.  x .40 = 60 lbs N/ acre  (available to corn crop)
This estimate is based on several assumptions, one of which is the loss of N through ammonia volatilization in the 24 hour period between application and incorporation. For late fall applications this loss is estimated at 25% of the ammonium N in the manure. If the manure was injected rather than broadcast and incorporated this loss could be virtually eliminated. In this example it would represent reduced nitrogen losses of about 23 lbs N/acre. Of course not all of this available nitrogen will make it to next years corn crop, but assume 70% does. If this is the case an additional 16 lbs of N would be supplied to next years corn crop. Remember, nitrogen losses from the ammonium form can vary widely with conditions at the time of manure application. For example, if conditions were warm (> 25 C) and the soil was dry the volatilization losses may reach 50% of the ammonium fraction rather than the 25 % used in this example.
Some factors to consider in regard to manure injection systems:

1. It does not appear that manure must be buried deep into the soil profile to minimize N losses.  A shallow 2-4 inch (5-10 cm) injection and covering of the manure appears to prevent most of the N loss.

  2.  Corn Belt research indicates that injection systems tend to provide more reliable manure N credits than surface applications with later incorporation.  

3. Odour concerns and the reduction in odour provided by injection may be a significant motivating force for adopting injection technology.

4. Tillage action of the injection system may be all the tillage that is required (other than leveling, perhaps) for subsequent crop production

Some injection toolbar designs may also be used as a sidedress toolbar if your circumstances present some opportunities for sidedressing manure in corn in June.
Click on the link to use the manure calculator:



Products Custom Haulers Barn Planning About us Contact us Mailing list News archive


Copright © 2010 - ADEO INTERNET MARKETING. All Rights Reserved