Jamesway
Home > Products > Manure systems > Vertical Electric Manure Pumps >

Vertical Electric Manure Pumps


Click to magnify/shrink Enlarge Click the image to shrink it.

6” Electric Manure Transfer Pumps

6” Electric Manure Transfer Pumps

The 6” electric manure transfer pump is designed to agitate and pump milking parlor wastewater and hog manure with fast results. The lower agitation nozzle will quickly agitate a small to medium sized reception pit and will transfer manure through a 4” PVC pipe up to several hundred feet (depending on elevation).

The 6” diameter impeller can agitate liquid at a rate of up to 480 GPM with a 5 HP electric motor. An oil-filled lower bearing assembly, with greasable seals, insures a long operating life. The 6” manure transfer pump is available in 4’ through 18’ lengths.




8” Electric Manure Transfer Pumps

8” Electric Manure Transfer Pumps

For more demanding wastewater or hog manure pumping jobs, the 8” Vertical Manure Pump is the right choice. This pump is the “big brother” of the 6” Vertical Pump, offering faster pumping and a bigger inlet that can handle minor debris. The belt drive is available in two speeds, for use with either a 7.5HP or 10HP motor. The square discharge tube adds extra rigidity.

The lower agitation nozzle rotates 270 degrees for thorough mixing of small to medium sized reception pits. And like all Jamesway pumps, the oil-filled lower bearing assembly with greaseable seals assures long life. The Jamesway 8” Vertical Pump is available in 4’ through 18’ lengths.




12 - 16” Electric Manure Transfer Pumps

12 - 16” Electric Manure Transfer Pumps

The 12” and 16” electric manure transfer pumps are designed to agitate and pump out manure reception pits with minimum hassle and maximum performance. Available in lengths from 6’ to 16’, and equipped with a 12” or 16” diameter impeller, our manure pumps can be equipped with a wide variety of electric motors (7.5-40 HP) to get the job done fast and easy.

Standard equipment includes twin agitation nozzles that rotate 270 degrees and a reliable triple sealed oil-bath lower bearing. Choose either a stationary floor mount or a sliding/tilting mount that allows for fast, easy installation and servicing.




20” Electric Manure Transfer Pump

20” Electric Manure Transfer Pump

20” electric manure transfer pump is designed to agitate large manure reception pits and transfer up to 1500’ to long-term storage. Available in lengths from 6’ to 16’, these pumps can be equipped with a 50, 75 or 100 HP electric motor to provide maximum pumping efficiency and performance.

Standard equipment includes twin agitation nozzles that rotate 270 degrees and a reliable triple sealed oil-bath lower bearing. Choose either a stationary floor mount or a sliding/tilting mount that allows for fast, easy installation and servicing.




Electric Prop Manure Agitator

Electric Prop Manure Agitator

The Jamesway Electric Prop Manure Agitator is used in reception pits to chop and blend bedding and manure into an easy-to-pump liquid. The back edge of the propeller is machined to scissor material against the hardened stationary knife edges and so reduces bedding length. The propeller may be aimed in any direction during operation for thorough agitation.

The high speed 20 inch diameter propeller produces a strong, concentrated stream of manure. The Jamesway Electric Prop Agitator may be equipped with a 7.5, 10 or 15HP motor according to the size of the reception pit. With larger motors, the higher speed on the propeller produces a higher volume stream that reaches further.

The propeller is mounted on an oversized gearbox, assuring long life. The gearbox is continuously charged with oil from the reservoir, and the output seals are greased by remote lines. The heavy square-tube body and high quality drive system with fiberglass shield have been used for many years in the 12” & 16” vertical pumps. These pumps are famous for durability, often with motors up to 40HP, so why would you want anything less? The Jamesway Electric Prop Agitator is first class from top to bottom.




Manure Flush Pump

Manure Flush Pump

Jamesway offers a variety of pumps for special applications such as floor flushing, transfer of separated liquids and tanker loading. With features like the oilbath lower bearing chamber and remote greasing on the lower seals, these pumps use the same heavy duty construction found in all Jamesway pumps. Choose from 6” or 8” discharge, and from a wide selection of fittings to suit your needs.




 

 

Products Custom Haulers Barn Planning About us Contact us Mailing list News archive

 

Copright © 2010 - ADEO INTERNET MARKETING. All Rights Reserved